VillaFix Brush in grout
Sweep in the dry grout using a soft rubber foam squeegee and/or a broom/brush.
When joints are full, remove dry excess grout from the paving, returning excess to the tub.Apply water using a hose set on a fine mist spray until water is pooling on the joint surface.
Use a Washboy to clean the paving units.
The joints may need topping up after watering, as the water added will push the grout into any voids in the joints. Pour grout onto affected areas and repeat process.
- DO use a fine mist spray of water to avoid dislodging product.
- DO use the right equipment for the cleaning process i.e. Washboy with rollers and sponge float.
- DO check weather forecast before installing. Cover paved area post installation if rain is forecast within 6 hours, to avoid the rain dislodging the grout.
- CAN be used on damp paving, natural stone must be dry, porcelain excess water to be removed.
- DON’T use on wet paving, excess water to be removed from the paving and allowed to dry.
- DON’T install when raining.
Try it risk free with a free sample!
Yes, if you are curious about how you can save hours from your day and achieve an excellent finish, request your free sample today. We think you will be impressed but we’d love to hear your feedback, and that’s all we are asking.